The Meriden…

From an 1894 issue of The Manufacturer and Builder:

The Meriden Cork-Puller

The cork-puller shown herewith is being manufactured and introduced by Manning, Bowman & Co., of Meriden, Conn., and 57 Beekman street, New York.  To operate the deice the handle of the puller is raised so that it will rest back over the counter ; the cork of the bottle is then pressed up firmly against the barrel of the puller, while the handle is brought forward and down to the position shown in the cut.  This operation, it is explained, passes the worm through the cork, while the reverse motion of turning the handle back until the cam is on the crank rests on the lever draws the cork.  After the bottle is removed, the handle is turned still further back, which, it is stated, presses the lever down and throws off the cork, leaving the machine in position for the next bottle.  A hole in the rack, or plunger, is provided for oiling the parts, and the top of the barrel is covered with a removable cap, so that the puller may be taken apart for replacing parts that may become broken.

The Meriden Cork-Puller

The manufacturers state that the instrument is well made, and simply strong for its intended purpose, and that it is not only easy to operate, but also durable in service.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s