Old Elk Whiskey – Always Pure

The lovely personal personal trainer and I headed off island over the weekend for a trip Down East.  For those of you not from Maine, which I gather is everyone that will read this, to go down east from where we live, you actually go north.

Down East which now is used to describe the geographical area of northern coastal Maine and the Canadian maritime provinces, stems from nautical terminology referring to wind direction, rather than physical location. In warmer months, the prevailing winds along that area of the coast blow from the southwest.  Ships then would sail downwind, to travel east; hence down east.

Not that really has anything to do with corkscrews, but what the heck.

So, we got off the boat, and headed north.

We skipped the Big Chicken Barn, but did hit the Trash or Treasure Barn.  No corkscrews were found, but we did see a few pieces of furniture that might work in the house.  And, we did hit a few more antique stores along the way.  Similarly, no corkscrews were found.

This was our first trip this far up the coast, and as we meandered north, we both enjoyed the bold rocky coastline.

Eventually we got to our hotel; which is also, conveniently, a pub.  Located in Lubec, Maine it is the easternmost town in the U.S.  So, we ate at the Easternmost restaurant, visited the Easternmost gift shop, toured the Easternmost museum, and had several pints at the Easternmost brewery in the U.S.   I will add here, that not every establishment advertises themselves this way, but several do.  Not that there are a lot of establishments in Lubec.  It is a fairly sleepy little town even this time of year, but that will change in the coming weeks as Summer travelers visit the seaside town.

lubec

With Lubec being our homeport for a few days, we visited the Quoddy light house, East Port, and also Campobello (Canada is across the bridge from Lubec).  A word of advice in driving through Campobello…slow down for the turtles…

All in all a really fun trip.  We got to see an area of Maine that one could easily fall in love with, a bit of antiquing (no corkscrews were found), some good food and wine (and beer), and some stunning scenery.

brew.jpg

For those of you in the ICCA, we are hosting the meetings in Maine in 2018.  With those extra days that you might be spending, a trip down east (which includes Acadia and Bar Harbor) is definitely worth experiencing.

Okay Josef, so what does this have to do with corkscrews???

Nothing really, but it was a pretty fabulous weekend.

And, in between all of this fabulous-ity, I managed to pick up an interesting pair of ladies legs online.

On one side, it would seem, more or less common as they are pink and white striped legs.

On the reverse side, however, there are two advertising plates mounted across the celluloid which carry advertising for OLD ELK WHISKEY ALWAYS PURE.

oldelkwhiskeylegs

oldelkbottle

The Old Elk Bottle pictured above is courtesy of the Lexington Historical Museum and they date the bottle to 1895, so it is pretty much the very bottle that these particular legs might have been used upon.

An interesting pair of legs…and a great weekend.

 

 

 

Advertisements

Ladies Legs Corkscrews… One dollar and ten cents each…

Also, from the 1913 Shapleigh Hardware Company catalog…

leggy

BALLET Per Dozen

No. 537—Bright Forged Steel Screw,

Length 2 5/8 inches; Folding Handle,

Pocket Knife Style; Steel Springs;

German Silver Lined; Assorted

Blue and White and Red and

White Celluloid Handles with

German Silver tips; Length

Folded 2 5/8 inches: Weight per

Dozen 1 1/2 lbs           $ 13.20

One Dozen in Box

Stealing away to Brimfield

A couple of weeks ago, the lovely personal personal trainer asked if I was going to go to the September Brimfield show. And, I had been thinking about it. But, with the wine shop, I was a little unsure if I could get away. Still, with a little change in the schedule, we worked it out, and I would be able to go. But, only for one day.

So, on Monday morning I headed south. And, given it was Labor Day, there were several million tourists also heading south and leaving Maine. Okay, maybe not several million, but the 95 was a parking lot, so I chose to meander down the 1, and hit traffic there too.

Knowing I didn’t have to get to my hotel until that evening, I just decided to hit a few antique stores and enjoy the slow and leisurely ride.

At one stop, I managed to uncover a few treasures under a whole lot of corkscrews.

lot.jpg

The corkscrew whistle was the best in the lot, but also there was a corkscrew that American Pickers Mike might want, as it carries an advertisement for Columbia Bicycles and Fowler Wheels.  The Walker Hallboy is in pretty nice shape as well.

whistle.jpg

After wading through traffic, I headed off to an antique store in Wells, Maine. I have always found corkscrews here, and I have been refraining from buying one particular piece for the past three years.

Three years? you ask.

Yes, every time I have visited, I have resisted paying the asking price for a wooden sheath corkscrew with advertising. But, this year, I knew I would finally give in, as not only is it an advertising corkscrew, it is an advertising corkscrew advertising “advertising cork screws.”

And, it happens to be an advertisement for A.W. Stephens, whose company I have been researching recently.  Interesting to note, it is actually a Clough patent, and is marked with Cambridgeport as Stephens’ address, which would predate his move to Waltham, when he went into production of his own patents.

It was still there.

And, I did buy it.  The lettering could be better, but given that I have never seen another…

img_4306

As I left Wells, I headed further south, and it quite literally took me 30 minutes to travel 5 miles. And, as I got towards Portsmouth, one of the bridges was closed, so, I snaked my way around backstreets, avoiding those that are less familiar with area, eventually hopping onto the 95 some miles later avoiding the lines of traffic at the tolls.

By late afternoon, I was pulling into the hotel in West Springfield, and set my alarm for the early morning.

Before daybreak, I was gearing up, and heading to Brimfield. Flashlight at the ready, I made my way to my normal first stop. What was going to be interesting this time around, was there was going to be less competition. Barry wasn’t going to be there. Tommy wasn’t going to be there. I haven’t heard if KC was going to be there. Could I be the only corkscrew collector hunting the fields?

Doubtful, but one could only hope.

So, when I made my first stop and JR’s tent (a KOOK, and collector of can openers), instead of hurrying off, we had a conversation, a cup of coffee, and discussed latest finds.

Of course, it also occurred to me that I am only here for one day, so perhaps I should start hunting.

Off I went, and soon enough happened upon a small grouping of corkscrews. I picked up the zig zag and a clough.

IMG_4313.jpg

And, there were other corkscrews about. Lots of Cloughs and Williamsons. At another booth, I picked up a Bennit for a fair price.

As the morning progressed, and there was more coffee, a couple of dealers that know both Barry and I, joked around that this was the first time in years that they didn’t tell me that, “Barry was just here.” Or, “the British guy was just in a little while ago.”

Of course, at those particular booths, there weren’t any corkscrews either.

Sometime before 11, I was walking through another field, and I saw a Murphy with the challenge-style handle. I picked it up, and noticed it looked different. In Bob Nugent’s article on Murphy, he mentions variation. I have long been looking for this version; for over a decade mind you, and a have never seen one. Just to be sure I wasn’t wrong about the variant, I pulled up my Murphy corkscrew page on my iPhone, and there it was:

The Challenge and the Victor models are usually marked R. MURPHY BOSTON across the top of the open frame which is usually arched.  On example has square cut openings and is marked ROBERT MURPHY.  It is probably an early example.

img_4329 

This may well make the best 6 of the year!

Shortly thereafter, I hit the booth where Tommy got his MOP mini legs in May. No rare legs there. I did pick up a few bits, and on a whim the slide mechanism and helix from a roundlet. Not that I really need it, but you just never know…

Looking at my watch, I headed off, hitting Dealer’s Choice at 11, and having exhausted that field, headed over to the last field of the day. And, whilst in line, who should come over to talk to me, but Mike Gordon. Of course, the field wasn’t open yet, but Mike was already inside. And, he explained that he had previously been in Dealer’s Choice, and found nothing in either.

Hmmmm…

Still feeling optimistic, I waited for the gates to open, and made my way through the aisles. Nothing in the first few, and then I ran into a dealer friend who historically has corkscrews—albeit expensive corkscrews. He explained he hadn’t picked up anything, but an adjacent dealer had a pair of legs. The dealer-friend had said he had offered x for them, but told me I could have them if I matched his price. During the conversation, it was explained they weren’t striped, but instead a gold flecked finish. Suddenly, even without seeing them, the price, which was fair, became a pretty good deal.

After searching his van for 15 minutes, the aforementioned adjacent dealer presented the corkscrew to me…

Apparently there were indeed corkscrews to be found in the field…

img_4331

Not a bad day at Brimfield; The Murphy, the gold legs…

With 2/3 of the field done, I turned a corner, and saw what looked like a Clough. But, the shadows in the booth, made it look like it could be the Lowenstein patent of 1903.  After retrieving it from the case, it was indeed the Lowenstein, with an advertisement for Humphrey & Martin’s Whiskey, and a whopping price tag of 9 dollars.

img_4332

 

After paying 8, the dealer asked if I wanted any of the others.

Others?

I went back to the same case, and saw a few wire Cloughs, and then an advertising Clough for Lactopeptine for Dyspepsia / For Indigestion. I picked up that one too, for the same price.

img_4344

Quite pleased with the Lowenstein and the Clough, I headed off again, visiting the rest of the booths, passing on an overpriced Mabson, and repeatedly checking the time. I needed to hit the road, as I had a 4 + hour drive back to Rockland.

Visiting the last booth, I headed back to the ATCPV (all-terrain-corkscrew-pursuit-vehicle) and started the drive back home. The lovely was there to meet me upon my return, and over wine had a bit of show and tell, and tales of the adventure.

img_4339

There surely are other corkscrews at Brimfield this week, and with several fields opening this morning, I am sure there will be other treasures to be had. As for my one day at Brimfield, it was a pretty darn good one.